Quick Answer: Why Won’T My Old IPod Turn On?

How do you turn on an old iPod touch?

Plug the iPod Touch into a power outlet and let it charge for an hour before trying to turn it on again.

Press and hold the Power and Home buttons.

Hold both buttons for about ten seconds.

In most cases, you’ll see the Apple logo appear on the iPod Touch’s screen..

How do I reset an old iPod?

To reset the iPod touch, touch and hold the sleep/wake button and the Home button at the same time for at least 15 seconds, ignoring the red Slide to Power Off slider, until the Apple logo appears. After you reset the iPod touch, everything should be back to normal, including your music and data files.

How long do iPods last before they die?

two to three yearsThe most common reason your iPod will die – aside from your dropping it and breaking the screen or ruining the hard disk – is because its battery will have reached its limit. iPod batteries generally last two to three years, depending on how often you use the iPod. You can replace them, sure, but it’s not for everyone.

How do I unlock an old iPod?

According to Apple, if you have forgotten the code, you can unlock the iPod by doing the following: Connect your iPod to the primary computer you use it with (the first one iPod synced with), and open iTunes. When you disconnect iPod from the computer, it will no longer be locked.

How do you revive a dead iPod touch?

Hold down the Sleep and volume down buttons on the iPod Touch for at least eight seconds until the Apple logo appears. If this doesn’t work, try again with the iPod connected to a wall outlet.

How do you fix an iPod classic that won’t charge?

My iPod Won’t Take a Charge AnymoreConnect your iPod to a different USB port or wall outlet. … Charge your iPod for several hours. … Restart your iPod. … Connect your iPod to your PC using the provided USB cable, open the iTunes software and click the “iPod” tab in the left column. … Purchase a new battery from Apple.

How do I get my iPod to unfreeze?

Force restart your iPod classic Put the Hold switch firmly in the unlocked position. Press and hold the Menu and Center (or Select) buttons for 8 seconds, or until you see the Apple logo.

Can you leave an iPod plugged in all the time?

Will leaving my iPod touch plugged in continuously have any bad effects on the battery? … Leaving any lithium based battery constantly plugged in is bad for it in the long term. In general, it is always recommended to discharge and re-charge your battery often, but at the very least you should do it once a month.

How do you fix an iPod that won’t turn on?

If your screen is black or frozen, you might need to force restart your device. … Press and hold both the Sleep/Wake and Volume Down buttons for at least ten seconds, until you see the Apple logo.On an iPod touch: Press and hold both the Sleep/Wake and Home buttons for at least ten seconds, until you see the Apple logo.

How long does it take for an iPod touch to charge from dead?

About 3-4 hoursAbout 3-4 hours. In general, for a functioning battery, the longer it takes, the more capacity in your battery. When the battery is finally ready to die, it will seem to charge in a very short period of time.

How do you fix a corrupted iPod classic?

Connect the device to the USB cable, press MENU+SELECT like a standard reset but keep holding for 12 seconds. The device should reboot as normal and then the screen should go blank. Now open iTunes and try to restore again. If all else fails try Erase your iPod – The Super Fix for most iPod Problems.

What happens if your iPod won’t turn on?

Your iPod may just need a soft reset. This is the most common reason why your iPod isn’t turning on. Simply, hold down the power button and the home button at the same time. If this has worked, you will see an Apple logo on your screen.

How do you turn on an old iPod?

Turn on iPod touch. Press and hold the Sleep/Wake button until you see the Apple logo. iPod touch will boot up and be ready to use. When iPod touch is on, press the Sleep/Wake button to put the display in sleep mode to save battery life.

Why did my iPod go black?

Most of the time that an iPod screen goes black, the problem’s related to minor firmware issues that can be easily solved. To troubleshoot black screen problems, the first thing to try is plugging your iPod into a charger and letting it charge for at least a half hour.

Will old iPods still work?

The older iPods are no longer supported by the new iTunes 12.9. To get the iPod back on track, it’s best to install an old version of iTunes on a Windows PC.

Can old iPods be repaired?

The most common repairs for iPod Classics are a battery or hard drive replacement. These are the components that usually die first, but often they are the only pieces that need to be replaced to get an old iPod working like new. Most of the models are not too difficult to open except the 6th generation.